Truma Mover XT4 Mode D'emploi page 28

Product description
4 Product description
4.1 Setup
4.1.1 Setup of the entyre system
The manoeuvring system consists of four separate drive
units, each with its own 12 V DC motor. These units are
mounted on the frame of the vehicle in the immediate
vicinity of the wheels, and are connected by a lateral
bar.
1
2
3
Fig. 1
1 Left drive unit (in the driving direction)
2 Right drive unit (in the driving direction)
3 Right drive unit (in the driving direction)
4 Left drive unit (in the driving direction
5 Remote control
6 Isolating switch
7 Battery
8 Charger
9 Safety socket
10 Remote control
28 EN
10
4
5 6 7 8 9
4.1.2 Setup of the drive unit
1 2
Fig. 2
1 Drive roller
2 Electric motor
3 status display Engaging and disengaging
4 Emergency disengaging mechanism
4.1.3 Setup of the power supply

WARNING
Fire hazard due to the control unit being co-
vered inside the caravan
If the control unit is inadequately ventilated, it
may overheat during operation.
Adequately ventilate the control unit.
Do not cover the control unit.
 Drawing serves as an example (Mover XT control
unit)
1 2 3
Fig. 3
1 Battery
2 Negative terminal
3 Positive terminal
4 Fuse
5 Isolating switch
6 Remote control
Mover XT4
3 4
4 5
6
60020-00216 00 08/2022