Movement Menu; Manual Control Menu - Videotec Ulisse Compact Manuel D'instructions

8.1.10 Movement Menu

1. Configuration: Sets one of the default
configurations of the pan & tilt.
• Standard: Sets the standard movement
speed.
2. Offset Pan: The pan & tilt has a mechanically
defined 0° position. The Offset Pan function
allows the definition of a different 0° position
using software.
Manual Control: To access the submenus
3.
operating the parameters associated with the
manual movements of the device.
Preset: To access the submenus used to to edit
4.
Preset values.
Patrol: To access the submenus used to edit
5.
Patrol values.
Autopan: To access the submenus used to edit
6.
Autopan values.
Motions Recall: To access the submenu which
7.
manages automatic load of the movements.
Advanced: Allows access to the advanced
8.
settings submenu.
MOTION
------------------------
1>CONFIG.
2 OFFSET PAN:
3 MANUAL CONTROL
4 PRESET
5 PATROL
6 AUTOPAN
7 MOTIONS RECALL
8 ADVANCED
Fig. 59
MNVCUCT_1511_EN
: STANDARD
+ 0.00
>
>
>
>
>
>

8.1.10.1 Manual Control Menu

1. Maximum Speed: Sets the maximum manual
speed.
2. Fast Mode: Enables the Fast mode. When
enabled, this option is used to move fastly the
pan & tilt by moving the joystick to the limit
stop.
Speed With Zoom: Enables the option Speed
3.
with Zoom. When enabled, this parameter
automatically slows down the Pan & Tilt speed,
based on the Zoom factor.
Tilt Factor: Sets the reduction factor of the tilt
4.
axis manual speed.
5. Autoflip: Enables the autoflip function (i.e.
when the tilt reaches the end of the stroke, it
automatically rotates the pan & tilt by 180°),
making it easier to follow the objects along
corridors or roads.
Movement Limits: To access the Limits menu.
6.
MANUAL CONTROL
------------------------
1>MAXIMUM SPEED
2 FAST MODE
3 VEL. WITH ZOOM
4 TILT SCALE FACT.:
5 AUTOFLIP
6 MOVEMENT LIMITS
Fig. 60
:100.0
: Y
: N
2
: Y
>
35