Télécharger Imprimer la page

BORETTI Maggiore Serie Installation-Emploi-Entretien page 98

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
Troubleshooting
Gas oven
Malfunction
The spark igniter doesn't work.
The burner won't turn on or
is difficult to turn on.
The burner shuts off when
the door is closed.
After about 10 minutes, the
oven shuts off.
The grill doesn't work.
Gas burner
Malfunction
All of the igniters light when
one knob is pressed.
The burner won't turn on
or is difficult to turn on.
The burner won't turn on
or is difficult to turn on.
The burner won't turn on
or is difficult to turn on.
The burner shuts off when
the knob is released.
The burner shuts off when
the knob is released after
10 seconds.
The burner shuts off on the
lowest setting.
The spark igniter keeps ticking.
If your problem was not solved with the aid of this overview, you can report your problem on
the Boretti website. You can also call 020-4363525.
Probable cause
The door isn't completely open.
The spark igniter is dirty
or dusty.
The movement of air
causes the flames in the
thermocouple to go out
temporarily.
The lowest setting is not
set up correctly.
The gas burner knob is not
turned off.
Probable cause
This is normal.
The spark igniter is dirty
or dusty.
The flame tamer doesn't fit
onto the burner head properly.
The burner head is crooked.
The thermocouple isn't
warm enough.
The knob hasn't been
pressed in properly.
The lowest setting is set too
low, so the thermocouple
can't get warm enough.
There is moisture in the
spark igniter (due to
boiling over or cleaning).
98
Solution
Open the door completely.
Clean the spark igniter
with a cloth.
Leave the door open for at
least a minute before closing
it so that the thermocouple
is sufficiently warmed up.
Contact technical services.
Turn the gas burner knob to off.
Solution
Not applicable.
Clean the spark igniter
with a cloth.
Place the flame tamer so
that it no longer can spin and
get stuck on the burner head.
Arrange the burner head
and make sure it is straight.
Hold the knob in firmly for
at least 8 to 10 seconds
(if the flame is burning).
Try again, pushing more
firmly this time.
Turn up the lowest setting.
The igniter will continue to
click until the liquid dries
up. This doesn't cause
any damage, but can be
annoying. You can set the
oven on a high temperature
to help the igniter dry out
more quickly.

Publicité

loading