Soehnle Body Balance Shape F4 Mode D'emploi page 18

GB
1.
2.
3.
4.
18
1 2 3
3 x 1,5 V Size AAA
Operating Elements
1. Confirm ( )
2. Minus (▼)
3. Plus (▲)
Preparation
1. Insert batteries.
Note: Immediately after inserting the bat-
teries (while "0.0" is still being display-
ed), place the body analysis scale on a
level surface and wait until the scale
powers down automatically. Then begin
with data entry. Otherwise, it might be
possible that the weight of the scale
would erroneously be added to the initial
weighting process. The same might occur
if the scale is held in the hand prior to
the weighing process.
2. For all measurements: place scale level
on a hard surface (not carpet).
3. Cleaning and care: clean only using
slightly damp cloth. Do not use solvents
or abrasives.
Never submerge scale in water.
4. A country-specific option to switch from
kg/cm to st/in or lb/in is possible by
pushing the key on the bottom of the
scale.
Attention! Slipping hazard if
surface is wet.