Operating The Length Gauge (Version 7730.65.002) - Soehnle 7730.65.001 Mode D'emploi

5.14 Operating the length gauge (version 7730.65.002)

Carefully push the length gauge upwards and carefully fold out the extension arm. Then slowly
push the unfolded length gauge down again until the extension arm rests on the head of the
person to be measured (o not press down). The height in cm can now be read off the attached
scale.
www.soehnle-professional.com
Measuring over 131 cm:
1. Pull out the rod
2. Position the head piece to horizontal position
3. Height reading can be taken at A point
Measuring under 131 cm:
1. Fold the plate and press the buckle
2. Pull down head piece while buckle is pressed
3. Height reading can be taken at B point.
B
Tollerance: ± 10 mm (e.g. for a body height of 180 cm, a body
height of 179 cm can also be measured by pushing the
headpiece downwards).
47