Ambu aBox Duodeno Mode D'emploi page 16

Explanation of the Symbols
Symbol Name
Image capture
Video recording
Zoom
Rinsing
6. Ending a Procedure and Shutting Down the System
6.1. Concluding a Patient Procedure
To conclude a patient procedure, remove the endoscope connector plug from the connector
socket of the aBox™ Duodeno. For detailed information and disposal of the endoscope, please
refer to the IFU of the aScope™ Duodeno.
6.2. System Shutdown
After the final procedure of the day, push the power button for 3 seconds. The system will now
begin the process of powering down. Shutdown is completed when the power button on the
aBox™ Duodeno is no illuminated.
Notice that incorrect shut-down of the aBox™ Duodeno may impair its functionality
permanently and may require service. 8
7. Fuse Replacement
Always use the fuses recommended by Ambu. To order new fuses, contact your sales
representative. Make sure that only appropriately trained personnel are in charge of
the fuse replacement.
Turn the aBox™ Duodeno OFF and disconnect the power cable from the mains outlet.
• Release the fuse by squeezing the lower tab of the fuse box using a screwdriver. 1
Pull the fuse box straight out. 2
•
• Replace both fuses. 3
Insert the fuse box into the aBox™ Duodeno until it clicks into position. 4
•
Connect the power cable to a grounded power source socket and turn the aBox™ Duodeno ON
and confirm the power output.
1
16
Description
This icon will be displayed when an image has
been captured
This icon will be displayed when video recording begins
This icon will be displayed when the zoom function is ON
This icon will be displayed when the rinsing function
is activated
7
2 3 4