Publicité
Les langues disponibles
Les langues disponibles
4.1. Attaching the Bottle Holder to the aBox™ Duodeno
The aBox™ Duodeno is shipped with one bottle holder that must be attached to the left side of
the device. Follow the illustrations below to properly attach the bottle holder.
Ambu® aBox™ Duodeno
5. Preparation and Inspection for Use
Numbers in gray circles below refer to illustrations on page 2. Inspect all ancillary equipment
to be used with this device as instructed in their respective Instructions for Use. Should any
irregularity be observed after inspection, follow the instructions as described in
section 12. Troubleshooting. If this device malfunctions, do not use it. Contact your Ambu sales
representative for further assistance.
•
Inspect the content of the aBox™ Duodeno. Match all items in the package with the
components shown in the device description in section 2. 1
•
If the device is damaged, a component is missing or you have any questions, do not use
the device, immediately contact Ambu.
•
It is recommended that the aBox™ Duodeno is placed on level surfaces with the
capability of movement (i.e. mobile cart, medical equipment booms) such that the
system can be moved to the most advantageous position for any given patient and/or as
required to satisfactorily perform the intended patient procedure. All such carts or
booms should be designed for this purpose and rated for the weight requirements
necessary (refer to the technical data section 10, as well as possessing a locking
mechanism to prevent inadvertent rolling or movement during a procedure. 2
•
Attach the Bottle Holder to the aBox™ Duodeno as described in section 4.1. 2
12
aBox Bottleholder - Assembly
Bottle Holder
5 x
Publicité
