Back Rest Adjustment - Ransomes HIGHWAY 213 VL Série Manuel D'utilisation

56
Fig.42
Fig.43
SEAT (GRAMMER) SEAT (GRAMMER) SEAT (GRAMMER) SEAT (GRAMMER) SEAT (GRAMMER)
The seat can be adjusted for leg reach and back
rest angle to provide a comfortable position for
operating the machine.
1. FORE AND AFT ADJUSTMENT
To Adjust:
The position of the adjusting lever is on the right
hand side of the seat below the seat cushion (B
Fig.35). By pulling the lever away from the seat, the
seat can be slid backwards and forwards, when in
the desired position release the lever to locate in
one of the pre set positions.

2. BACK REST ADJUSTMENT

To Adjust:
The position of the release lever is on the left hand
side of the seat (A Fig.36). While sitting on the seat
pull the release lever upwards to release the back
rest.( The back rest is spring loaded to fold onto the
seat cushion.) Lean back to obtain the desired
position for the back rest and release the lever to
locate in one of the pre set positions.
NOTE:The seat is fitted with a microswitch to sense
operator presence.
GB GB GB
GB GB