Table des Matières
Publicité
36
5.
The use of the Free wheel control will
enable the machine to be pushed.
6.
Repeat steps 1 to 4 as necessary.
7.
If the machine needs to be steered while
being pushed then move the parking brake lever to
its mid position.
8.
Move the brake release lever so that the
micro switch is depressed before trying to start the
engine.
NOTE: the micro switch is fitted to prevent starting
the engine unless the brake release lever is in the
correct position. Starting the engine with the valve
open would over pressure the seals when operating
the steering valve.
Publicité
Table des Matières
