48
Fig.27
Fig.28
Fig.29
Fig.30
Weekly (Every 40 working hours)
Weekly (Every 40 working hours)
Weekly (Every 40 working hours)
Weekly (Every 40 working hours)
Weekly (Every 40 working hours)
1. Lubricate the following points using Shell Darina
R-2 grease.
(1)
Lift arm pivots (A Fig.27)
(2)
Steering Bellcrank (A Fig.29
(3)
Steering ram rod end (B Fig.29
(4)
Unit rolls (A Fig.30)
(5)
Unit pivot brackets (A Fig.31)
2 . Lubricate the following with Rocol Anti-sieze
spray:
(6)
Height adjustment sleeves (B Fig.30
(7)
Unit bearing housing pivots (C Fig.30)
(8)
Divertor Valve spools.
Every 400 Working hours
Every 400 Working hours
Every 400 Working hours
Every 400 Working hours
Every 400 Working hours
Change hydraulic return filter: Remove oil filter
canister (A Fig.32) from under fuse and relay
compartment and discard, replace with new one.
When FilterWarning Light Illuminates
When FilterWarning Light Illuminates
When FilterWarning Light Illuminates
When FilterWarning Light Illuminates
When FilterWarning Light Illuminates
Change hydraulic suction filter as soon as warning
light illuminates. Remove oil filter canister (A Fig.28)
from beside the engine and discard, replace with
new one.
GB
GB
GB
GB
GB
Fig.31
Fig.32