Packaging, Transport; Storage; Disposal Of The Product - Burkert S030 Manuel Utilisateur

Metal fitting
Fig. 6: Position of O-ring in an S030 fitting
11.

pAcKAGinG, TRAnSpoRT

Caution
damage due to transport
Transport may damage an insufficiently protected part.
• Transport the fitting in shock-resistant packaging and
away from humidity and dirt.
• Do not expose the fitting to temperatures that may
exceed the admissible storage temperature range.
english
44
13.

diSpoSAl oF The pRoducT

→
Dispose of the fitting and its packaging in an environ-
mentally-friendly way.
Caution
damage to the environment caused by products
contaminated by fluids.
• Keep to the existing provisions on the subject of waste
disposal and environmental protection.
note:
Comply with the national and/or local regulations
which concern the area of waste disposal.
english
46
Plastic fitting
12.

SToRAGe

Caution
poor storage may damage the fitting.
• Store the fitting in a dry place away from dust.
• Storage temperature: depends on paddle-wheel and
body fitting materials (see following table).
Paddle-wheel Body fitting
material material
PP • Stainless steel
• Brass
• PVDF
• PP
• PVC
PVDF • Stainless steel
• Brass
• PVDF
• PP
• PVC
Storage
temperature
-15°C...+80°C
-15°C...+60°C
-15°C...+100°C
-15°C...+80°C
-15°C...+60°C
english
45 45
english
47 47