Installation Tools; Packaging, Transport, Storage - Burkert 2300 Manuel D'utilisation

Packaging, transport, storage

12.2 installation tools
installation wrench for packing gland
(only for PEEK spindle guide)
installation wrench
Spindle diameter 10 mm
Spindle diameter 14 mm
Tab. 26: Installation wrench for PEEK spindle guide
modified socket wrench for packing gland
(Series production status since April 2012)
socket wrench
Spindle ∅ 10 mm
Spindle ∅ 10 mm
Spindle ∅ 14 mm
Tab. 27: Modified socket wrench
special wrench for rotating the actuator
(only for actuator without hexagon)
Order no.
Tab. 28: Special wrench for actuator without hexagon
If you have any queries, please contact your Bürkert sales
office.
Type 2300
Order no.
665 700
665 701
Orifice af Order no.
dn
15 19 683 220
20 – 32 21 683 222
25 – 50 21 683 223
665 702
13 packaging, TranspOrT,
sTOrage
note!
transport damages!
Inadequately protected equipment may be damaged during transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the permitted storage
temperature.
incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature -20...+65 °C.
damage to the environment caused by device components
contaminated with media.
▶ Dispose of the device and packaging in an environmentally
friendly manner.
▶ Observe applicable regulations on disposal and the environment.
note:
Observe national waste disposal regulations.
english
43