Installation Tools; Packaging, Transport, Storage - Burkert 2101 Manuel D'utilisation

12.2 installation tools
installation wrench for packing gland
(Only for removal of packing glands up to January 2013)
installation wrench Orifice
Spindle ∅ 10 mm 15 – 40
Spindle ∅ 14 mm
32 – 65
Tab. 12: Installation wrench
modified socket wrench for packing gland
(Series production status since January 2013)
socket wrench
Spindle ∅
10 mm
Spindle ∅
14 mm
Tab. 13: Modified socket wrench
special wrench for rotating the actuator
Order no. 665 702
Tab. 14: Special wrench
If you have any queries, please contact your Bürkert sales
office.
36
Order no.
665 700
665 701
Orifice af Order no.
15 – 40 19 683 221
32 – 65 21 683 223
english
Type 2101
Packaging,Transport,Storage
13 packaging, TranspOrT,
sTOrage
noTe!
transport damages!
Inadequately protected equipment may be damaged during transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the permitted storage
temperature.
incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature -20 – +65 °C.
damage to the environment caused by device components
contaminated with media.
▶ Dispose of the device and packaging in an environmentally
friendly manner.
▶ Observe applicable regulations on disposal and the environment.
note:
Observe national waste disposal regulations.