Installation Tools; Packaging, Transport, Storage - Burkert 2100 Manuel D'utilisation

Masquer les pouces Voir aussi pour 2100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

13.2. Installation tools
Installation wrench for packing gland
Only for removal of packing glands up to January 2013.
Installation wrench
Orifice
Spindle ∅ 10 mm
15 – 40
Spindle ∅ 14 mm
32 – 65
Tab. 11: Installation wrench
Modified socket wrench for packing gland
(Series production status since January 2013)
Socket wrench
Spindle ∅
10 mm
Spindle ∅
14 mm
Tab. 12: Modified socket wrench
Special wrench for rotating the actuator
Order no.
665 702
Tab. 13: Special wrench
If you have any queries, please contact your Bürkert sales
office.
34
Order no.
665 700
665 701
Orifice
AF
Order no.
15 – 40
19
683 221
32 – 65
21
683 223
english
Type 2100

Packaging, transport, storage

14.
PACKAGING, TRANSPORT,
STORAGE
NOTE!
Transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the permitted storage
temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature -20 – +65 °C.
Damage to the environment caused by device components
contaminated with media.
• Dispose of the device and packaging in an environmentally
friendly manner.
• Observe applicable regulations on disposal and the
environment.
Note:
Observe national waste disposal regulations.

Publicité

Table des Matières
loading

Table des Matières