Installation - Burkert S030 Manuel Utilisateur

Material Connection type and standards
Flange
• acc. to EN1092-1 (ISO PN16)
• acc. to ANSI B16-5-1998
• acc. to JIS 10K
All
Brass
All
PVC
All
PP
All
PVDF
english
28
7.

inSTAllATion

Safety instructions
danger
risk of injury due to high pressure in the installation.
• Stop the circulation of fluid and release the pressure
before loosening the process connections.
risk of injury due to high fluid temperatures.
• Use safety gloves to handle the fitting.
• Stop the circulation of fluid before loosening the proc-
ess connections.
risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident preven-
tion and safety relating to the use of hazardous products.
Warning
risk of injury if the temperature/fluid pressure
dependency is not respected.
• Take account of the fluid temperatures/pressures
dependency according to the nature of the materials
from which the fitting is made and that of the measur-
ing device used (see the relevant user manual).
• Conform to the Pressure Directive 97/23/EC.
english
30
K factor K factor (imp/l)
DN8 DN15 DN20 DN25 DN32 DN40 DN50 DN65
DN6
-
-
278
440
278
440
-
-
278
440
risk of injury due to non-conforming installation.
• Fluidic installation can only be carried out by qualified
and authorised personnel with the appropriate tools.
• Observe the installation instructions for the measuring
device inserted into the fitting.
risk of injury due to an uncontrolled restart.
• Ensure that the restart of the installation is controlled
after any interventions on it.
installation onto the pipe
risk of injury due to high pressure in the installation.
•
risk of injury due to high fluid temperatures.
•
•
risk of injury due to the nature of the fluid.
•
105.7 66.48 49.03 31.82 19.84 11.36 -
105.7 66.48 49.03 31.82 19.84 11.36 -
115.8 75.25 52.91 28.47 17.29 10.20 -
110.2 74.18 52.86 28.44 17.41 10.06 -
118.4 78.01 57.03 31.65 18.97 10.86 -
Warning
danger
Stop the circulation of fluid and release the pressure
before loosening the process connections.
Use safety gloves to handle the fitting.
Stop the circulation of fluid before loosening the proc-
ess connections.
Respect the prevailing regulations on accident preven-
tion and safety relating to the use of aggressive fluids.
english
29 29
english
31 31