Burkert S030 Manuel Utilisateur page 8

DN P A Standard
[mm] [mm] [mm]
40 39,6 120 DIN 8063
106 DIN 16962
106 ISO 10931
50 45,7 130 DIN 8063
110 DIN 16962
110 ISO 10931
L
english
24
Material Connection type and standards
Weld-ends
• acc. to SMS 3008
• acc. to BS 4825 / ASME BPE
• acc. to DIN 11850 series 2
• acc. to EN ISO 1127 / ISO 4200
external thread
• acc. to SMS 1145
• acc. to G
internal thread
• G, Rc, NPT
clamp
• acc. to SMS 3017 / ISO 2852
• acc. to BS 4825 / ASME BPE
• acc. to DIN 32676
• acc. to ISO (for piping acc. to
EN ISO 1127 / ISO 4200)
english
26
L D H
[mm] [mm] [mm]
30,0 50 31,5
23,0
23,0
37,0 63 39,5
27,0
27,0
A
K factor
DN6
-
-
-
-
-
440
-
-
-
-
-
K factors (in imp/l)
The K factors have all been determined under the following
terms of reference: fluid = water, water and room tempera-
tures of 20°C, minimum upstream and downstream dis-
tances respected, appropriate pipe dimensions.
If the S030 fitting is combined with an electronic
device which does not automatically convert the
k factors, make the conversion using one of the
following formulae:
K factor in imp/gallon US = K factor in imp/l x
3,785 to obtain flow rate in gallon US / time unit
K factor in imp/gallon UK = K factor in imp/l x
4,546 to obtain flow rate in gallon UK / time unit
K factor (imp/l)
DN8 DN15 DN20 DN25 DN32 DN40 DN50 DN65
- - - 66.85 -
- - 105.7 66.85 49.03 31.08 19.92 11.36
278 105.7 105.7 66.85 49.03 31.08 19.92 -
105.7 66.48 49.03 31.82 19.84 11.36 -
-
- - - 66.85 -
278 105.7 66.48 49.03 31.82 19.84 11.36 -
105.7 66.48 49.03 31.82 19.84 11.36 -
-
- - - 66.85 -
- - 105.7 66.85 -
278 105.7 105.7 66.85 -
105.7 66.48 49.03 31.82 19.84 11.36 -
-
english
25 25
31.08 19.92 11.36
31.08 19.92 -
31.08 19.92 11.36
31.08 19.92 11.36
31.08 19.92 -
english
27 27