Mounting And Demounting General Precautions - John Bean T 8026 Manuel D'utilisation

1
30
5-1
Operation
5.0 Mounting and demounting.
General precautions
CAUTION:
B E F O R E M O U N T I N G A T I R E O N A R I M
E N S U R E T H E F O L L O W I N G R U L E S A R E
OBSERVED:
A- THE RIM MUST BE CLEAN AND IN GOOD
C O N D I T I O N: I F N E C E S S A RY C L E A N I T
AFTER REMOVING ALL WHEEL-WEIGHTS
INCLUDING 'TAPE WEIGHTS' INSIDE THE
RIM.
B- THE TIRE MUST BE CLEAN AND DRY, WITH
NO DAMAGE TO THE BEAD AND THE CASING.
C- FOR WHEELS FULL OR WATER OR OTHER
L I Q U I D S , C O M P L E T E LY R E M O V E T H E
LIQUID CONTAINED IN THE WHEEL BEFORE
PLACING IT ON THE TIRE CHANGER.
D- REPLACE THE RUBBER VALVE STEM WITH A
NEW ONE OR REPLACE THE 'O' RING IF THE
VALVE STEM IS MADE OF METAL.
E- IF THE TIRE REQUIRES A TUBE, MAKE SURE
THE TUBE IS DRY AND IN GOOD CONDITION.
F- LUBRICATION IS NECESSARY FOR CORRECT
MOUNTING OF THE TIRE AND PROPER
CENTERING. USE ONLY AN APPROVED
LUBRICANT FOR TIRES.
G- MAKE SURE THE TIRE IS THE CORRECT SIZE
FOR THE RIM.
H- THE TOOL LOCKING PIN (1,FIG.5.0-1) MUST
BE APPLIED ONLY WHEN USING THE DISC
TOOL ON RIM WHEELS.
Operator's Manual T 8026