Mounting And Demounting. General Precautions - John Bean T2545T Manuel D'utilisation

5.0 Mounting and demounting. General
precautions
CAUTION:
BEFORE MOUNTING A TIRE ON A RIM ENSURE THE
FOLLOWING RULES ARE OBSERVED:
A- THE RIM MUST BE CLEAN AND IN GOOD
CONDITION: IF NECESSARY CLEAN AFTER
REMOVING ALL WHEEL-WEIGHTS INCLUDING
'TAPE WEIGHTS' INSIDE THE RIM.
B- THE TIRE MUST BE CLEAN AND DRY, WITH NO
DAMAGE TO THE BEAD AND THE CASING.
C- REPLACE THE RUBBER VALVE STEM WITH
A NEW ONE OR REPLACE THE 'O' RING IF THE
VALVE STEM IS MADE OF METAL.
D- IF THE TIRE REQUIRES A TUBE, MAKE SURE
THE TUBE IS DRY AND IN GOOD CONDITION.
E- LUBRICATION IS NECESSARY FOR CORRECT
MOUNTING OF THE TIRE AND PROPER CENTERING.
USE ONLY AN APPROVED LUBRICANT FOR TIRES.
F- MAKE SURE THE TIRE IS THE CORRECT SIZE
FOR THE RIM.
17
EN -