Safety Devices; Marking Data - John Bean T 8026 Manuel D'utilisation

d
e
f
g
h
i
16
b c
1-1
Safety

1.3 Safety Devices

WARNING: DO NOT BYPASS ANY SAFETY FEA-
TURES.
This machine has several protectors to prevent com-
pression or crushing hazards.
- There is a micro-switch protection under the
chuck arm to prevent compression.
- The rotation speed of the chuck has been
limited to a maximum of 8 rpm to reduce dragging or
entrapping hazards. There is an emergency button on
the portable control unit.
- There is an emergency button on the portable
control unit.

1.4 Marking data

A marking label attached to the machine shows the
following data:
a- Name and address of the manufacturer
b- Compliance marking
c- Year of manufacture
d- Model
e- Serial number
f- Weight
a
g- Electric specifi cations (volt, ph, Hz, kW and A)
h- Required Pressure
i- Acustic pressure
Operator's Manual T 8026