After-Sales Service - John Bean T 8026 Manuel D'utilisation

Trouble shooting
The transformer protection fuses easily blow.
1) Short circuit in the electric cord connecting the
portable control unit to the electric cabinet.
· Call the authorized service center for assistance.
The chuck does not hold the wheel fi rmly.
1) The teeth of the chuck jaws are full of dirt or worn out.
· Clean the teeth of the chuck jaws with a wire brush.
2) The protectors for light-alloy wheels are damaged
or worn out.
· Replace the protectors for alloy wheels.
3) The check valve or manifold of the chuck cylinder
leak oil.
· Call the authorized service center for assistance.
Speed reduction of the hydraulic mouvements.
1) Hydraulic oil level low
· Add oil
2) Hydraulic circuit partly clogged
· Call the authorized service center.
3) Hydraulic pump damaged
· Call the authorized service center.
7.1

After-sales service

Contact your area agent.
The company website provides information about the
Customer Assistance service around the world:
http://www.snapon-equipment.eu
Hotline (International) +49 8634 622-8996
Hotline (German): +49 8634 622-8994
Reception +49 8634 622-0
· Snap-on Equipment Germany ·
· Konrad-Zuse-Straße,1 D-84579 Unterneukirchen ·
Operator's Manual T 8026
58