Instruction: Format Of This Manual; Safety; Safety Label Meanings - John Bean T 8026 Manuel D'utilisation

EAL0408G08A
EAL0408G04A
6
EAL0395G35A
8-23562A
Instruction/Safety
INSTRUCTIONS:
Format of this Manual
This manual contains text styles which make you pay
extra attention:
Note: Suggestion or explanation.
CAUTION: STRESSES THAT THE FOLLOWING
ACTION MAY CAUSE DAMAGE TO THE UNIT OR
OBJECTS ATTACHED TO IT.
WARNING: STRESSES THAT THE FOLLOWING
ACTION MAY CAUSE (SEVERE) INJURY TO THE
OPERATOR OR OTHERS.
· Bulleted list:
· indicates that action must be taken by the operator
before being able to go to the next step in the sequence.
1.0

Safety

Safety in all its aspects is fundamental. In par-
ticular anyone that operates in the work environment,
using machinery and tools, must be safety-trained.
· Familiarise yourself with the contents of this chapter
and operate in compliance with the safety indica-
tions.
1.1

Safety Label Meanings

IMPORTANT!! SAVE THESE
INSTRUCTIONS
EAL0408G08A (USA) - EAL0395G35A (EC)
Risk of wheel exploding with hazardous fl ying debris.
• Never infl ate the tire on the machine. Infl ation must
take place in special infl ation cages which comply
with safety standards.
Infl ating the tire on the machine may cause it to explode,
resulting in death or serious injury.
EAL0408G04A (USA) - 8-23562A (EC)
Electrical risk. Electric shock hazard.
• Do not operate equipment with a damaged power
cord or if the equipment has been dropped or
damaged, until it has been examined by a qualifi ed
service person.
• If an extension cord is necessary, a cord with a
current rating equal to or greater than that of the
equipment should be used. Cords rated for less
current than the equipment can overheat.
• Unplug equipment from electrical outlet when not
in use. Never use the cord to pull the plug from the
outlet. Grasp plug and pull to disconnect.
• Do not expose the equipment to rain. Do not use on
Operator's Manual T 8026