Introduction - John Bean T 8026 Manuel D'utilisation

20

Introduction

3.0 Introduction
Congratulations on purchasing the pneumatic-electric
tire changer.
This tIre changer is designed for ease of operation,
safe handling of rims, reliability and speed.
With a minimum of maintenance and care your tIre
changer will provide many years of trouble-free
operation.
Instructions on use, maintenance and operational
requirements of the machine are covered in this
manual.
STORE THIS MANUAL IN A SAFE PLACE FOR
ANY FURTHER REFERENCE. READ THIS
MANUAL THOROUGHLY BEFORE USING THE
MACHINE.
Application.
The tire changer illustrated here is intended to be
used as a device to demount/mount tubeless truck
tires mounted on one-piece rims with the following
specifi cations:
Maximun tIre diam.:
Maximum tIre width:
This device must be used in the application for which
it is specifi cally designed.
Any other use shall be considered as improper and
thus not unreasonable.
In particular, this device is not suitable to infl ate tires.
Infl ation of tires shall be carried out in an approved
infl ation safety cage.
The manufacturer shall not be considered liable
for possible damage caused by improper, wrong or
unreasonable use.
Manuals to the unit.
· Operator's Manual
The operator must be familiar with it.
· Spare Parts List
Manual for use by service personnel.
Installation instructions.
The installation instruction are in Chapter 9,
Appendices.
Operator's Manual
1500 mm (59")
700 mm (27"1/2)
(Chapter 1 – 9)
T 8026