Klarstein BROTILDE FAMILY Mode D'emploi page 45

Overheating protection and malfunction protection
• If the appliance overheats or a malfunction is detected, the appliance switches off
automatically. If you do not know why the appliance turns off, read the following
before contacting costumer service:
1) Working condition fault function
• The appliance has a working condition fault function, e.g. if the working
condition doesn't match the initial condition required by the MENU function.
• For example, if the bread or dough function has been selected and the
temperature of the appliance is too high or too low, the initial requirement of
dough making can't be reached (the temperature should fall into the range
from 15 °C to 55 °C.) When you start the programme, the appliance will
automatically stop the programme in this situation, the LCD display shows
"E00" or "E01" and the appliance will beep continuously to warn you.
Take out the bread pan, when the temperature drops below the working
temperature. You can reset the menu and restart the programme. If it still doesn't
work, you can contact the customer service for repair.
2) Abnormal condition fault function
• The appliance has an abnormal condition fault function, e.g. when the
thermostat opens or closes.
• When the thermostat opens, the LCD display shows "EEE" after turning on and
the appliance beeps continuously.
• When the thermostat closes, the LCD display shows "HHH" after turning on
and the appliance beeps continuously.
• In both cases, contact customer service for repair.
Warning function
During the bread making, it will beep sometime for warning:
1. When the appliance is re-energized, it will beep for one time.
2. If you press one of the function buttons MENU, COLOR, LOAF, TIMER, EXPRESS/
QUICK, the appliance beeps once each time you press the corresponding button.
3. When you adjust programme (MENU), time (TIMER), color (COLOR) and
browning level (LOAF), the content in the LCD display will flash. If there is no
pressing in 5 seconds, the LCD display stops blinking and will beep 1 time.
4. With each press on the START/PAUSE/STOP button, it will beep 1 time.
5. In programmes with adding fruit function, the appliance beeps 8 times to warn you.
6. When the programme is finished, the appliance beeps 10 times as a reminder. If the
keep warm function is then activated and it is also finished, the appliance will beep
again 10 times to remind you that the preparation is finished and the bread or other
food can be removed.
EN
45