Warranty; User's Inspection - KLS Martin group marCut Mode D'emploi

WARNING
Danger of injuries from insufficient qualification of the operator!
Safe application of bipolar scissors requires that the user is familiar with the technology and
application modes of electrosurgery.
Electrosurgical instruments may be used only by persons specially trained or instructed in
their use!
1.4

Warranty

Our Standard Terms and Conditions of Sale effective at the time shall apply. Agreements di-
verging from these Standard Terms and Conditions do not restrict the legal rights of the buyer.
Any warranty exceeding the above provisions shall require a contractual form and shall exclude
component-related vandalism, software updates and consumables.
Important Notices
The product may only be repaired by Gebrüder Martin or a qualified person or firm expressly
authorized by Gebrüder Martin to perform such work.
If the repair is carried out by a person or firm specially authorized by Gebrüder Martin, the
operator of the product is required to obtain from the repairer a certificate with details about
the nature and scope of the repair work done. This certificate must show the date of the repair
and the details of the person or firm carrying out the work and must be signed.
In all cases where a party other than the product manufacturer performed the work, repaired
products must be additionally marked with the repairer's ID label.
Improper interventions or alterations performed by third parties during the period of limitation
shall void any and all warranty claims. Performing unauthorized actions on the product is
strictly prohibited at any time. Non-compliance will void any liability claim against
Gebrüder Martin.
1.5

User's Inspection

Immediately upon receipt, the goods must be checked for completeness and potential
•
damage in transit.
Notice of any such damage must be given immediately.
•
• Upon receipt of the product, the original packaging must be checked for integrity.
22
Instructions for Use
®
marCut bipolar scissors
V. 4