Sirona C1+ Notice D'utilisation page 151

Sirona Dental Systems GmbH
A
59 06 446 D 3386
D 3386.201.01.08.02
2
15.1 Function of the keys, left row:
Restoring the SIROCAM 3 factory color settings
When the symbol is marked with a bold frame, the fac-
tory settings are active. When the symbol frame is nor-
mal, the settings are active once the white balance has
been made.
i
NOTE
The key is displayed only if the camera is removed and
active.
White balance for SIROCAM 3
A white balance is possible only if the camera is housed
in the dentist element or in the additional instrument
holder.
i
NOTE
The key is displayed only if the camera is removed and
active.
The camera handpiece contains data making it possible
to restore the factory-set color definitions regardless of
the dental treatment center where the camera is used.
This makes it possible to use the camera at different
dental treatment centers.
Perform a white balance for adaptations, e.g. for individ-
ually wanted color settings.
For this purpose the sliding switch (2) must be set in the
middle position (survey exposure).
The camera is then held at a distance of 2 – 5 cm in the
live mode with the lens over the color sample sheet A
(Order No. 59 12 956) delivered with the dental treat-
ment center or over another color sample sheet.
The complete screen may in this case display only the
aimed at color surface.
Different color patterns will produce different results with
respect to the color settings.
For example, a color pattern with blue parts will reduce
the amount of blue color in the video image.
Now activate the "white balance" key.
Once the white balance is finished (may take several
seconds), an acoustic signal is emitted and the symbol
frame appears bold.
If the new color setting does not correspond with your
expectations, then you can restore the factory setting as
described or repeat the balance.
15 Basic setting dialog 1
55