Sirona C1+ Notice D'utilisation page 162

17 SIVISION 3 / SIROCAM 3 / SIROCAM C
17.4 Camera dialog: Video mode
66
Switching to PC mode
The image from the PC, e.g. SIDEXIS/VIDEXIS, will
then appear on the SIVISION monitor.
The camera switches to the LIVE IMAGE.
This mode remains active even if the treatment center is
switched OFF and back ON.
Switching to WHITE IMAGE
Freely selectable function, ON / OFF.
e.g. call key (connected by your service engineer).
# #
The function can be preselected as a key or switch in the
basic setting dialog 1 (see page page 56).
Function of the keys, right row:
Switching between QUAD IMAGE and SINGLE
IMAGE.
When switching to SINGLE IMAGE, the image previ-
ously selected in the QUAD IMAGE is displayed.
Switch to the
manual chair setting dialog
When the camera is deposited, the camera dialog is also
closed.
Switch over to BLACK IMAGE
Unit lamp
can be switched ON / OFF as required.
i
In video mode, the monitor is automatically switched off
when the electrosurgical handpiece is activated and then
switched on again when the handpiece is put back in its
holder.
Sirona Dental Systems GmbH
NOTE
59 06 446 D 3386
D 3386.201.01.08.02