Sirona C1+ Notice D'utilisation page 120

8 Key functions in the assistant dialog
24
S
0 m
30 s
2 : 30
min
sec
C
Program S with special function.
On actuation of this key, the treatment center travels into
the mouth rinsing position.
If this key is pressed a second time, the treatment center
returns to the last treatment position.
Programming the S key (see page page 34).
Switch
to the Service dialog
Preselection of timer setting
Three individually adjustable timer settings can be
selected
(factory setting: 10, 30, 60 sec).
The settings are selected by repeatedly touching the
preselection key lightly and briefly.
If this key is actuated longer, the
setting dialog appears.
Here the times can be changed separately for seconds
and minutes by actuating the – / + keys.
Setting range continuously 1sec – 60min
Composite key C (for unit lamp)
This key can be used to set the unit lamp to minimum
brightness prior to making a composite filling in order to
prevent premature hardening of the filling material.
It can be reset by actuating the same key or the unit lamp
ON / OFF key.
Unit lamp ON / OFF
If this key is actuated longer, the
brightness setting dialog appears. Here you can adjust
the brightness of the activated lamp in 9 steps (as long
as the C composite key is not actuated).
Sirona Dental Systems GmbH
59 06 446 D 3386
D 3386.201.01.08.02