Emergency Crank Handle - Fohmau - Stryker GoBed II MedSurg Bed FL28C Guide D'utilisation

Emergency Crank Handle - FOHMAU

The emergency crank is used to adjust the position of the mobile sections of the bed during a power failure .
OPERATION
WARNING
Before using the emergency crank during a power failure, always unplug the unit . An unexpected return of power could
rotate the handle and cause injury .
Note:
• Exert pressure on the crank while turning to compress the adaptor spring .
• Only the Fowler and Gatch positions can be adjusted during a power failure .
1 . Insert the crank into the appropriate aperture located at the foot end of the bed and follow the icon indications to
adjust as desired .
2 . Remove the cranks after use and store it at the head end of the bed .
Return To Table of Contents
1-34 280C-009-001 REV B www.stryker.com