INSTRUCTIONS AND WARNINGS FOR USE
Important
Besides being authorised and appropriately documented,and if necessary,instructed and
trained, users,on fi rst usage, have to simulate several operations to identify the controls
and main functions.
Use only as intended by the manufacturer and never tamper with any device to obtain per-
formance levels outside the rated specifi cations.
Before use, check that the safety devices are properly installed and in good working order.
As well as taking care to meet these requirements, users must also implement all safety
regulations and read the description of the controls and the start-up procedure carefully.
Immediately report any anomaly or deterioration of the components and/or parts of the
unit and if necessary ask qualifi ed staff to intervene for the inspection and/or replacement
activities.
The manufacturer recommends using the oven above 250°C only when strictly necessary
and for short periods of time, not to reduce the life of your equipment.
DESCRIPTION OF CONTROLS
The illustration shows the appliance's control panels,
while the list details the descriptions and functions of
the individual controls.
A) Touch screen display: it displays the work param-
eters and the alarm codes and is used to select the
relative function or to change the values.
B) Knob: Used to select the function required or mod-
ify values.
– Clockwise: scrolls the zones "downwards or to
the right" or increases the highlighted value.
– Anticlockwise: scrolls the zones "upwards or to
the left" or decreases the highlighted value.
After selecting the function required or the value,
press the knob to confi rm and save the function or
value.
C) On/off button: turns the appliance's electricity
supply on and off (in models AT201 and AT202 the
power button is located on the left hand side of the
control panel).
D) USB port: used to connect a remote data storage
unit to the appliance.
E) Connector for optional probe or vacuum probe
(accessory on request).
F) Loudspeaker: reproduces the sound signals.
3354462_ATG_ut_GB
USE AND OPERATION
E
- 9 -
A
B
D
F
C
GB
ENGLISH