Connecting The Burnt Gas Exhaust Vent; Conversion Of Gas Supply - Angelo Po AT 61G-GW-GR-GWR Manuel D'utilisation

CONNECTING THE BURNT GAS EXHAUST VENT

Important
Make the connection in compliance with the relevant legal requirements, using appropri-
ate and recommended materials.
Important
The maximum exhaust gas temperature at the
outlet is about 400 °C.
Connecting to a fan extractor hood
Position the appliance underneath the hood (C) as
shown in the diagram.
Important
The gas supply tap must open automatically when
the fan of the extraction system is switched on.

CONVERSION OF GAS SUPPLY

The manufacturer has tested the appliance with its
own mains gas, identifi ed by the sticker applied to
the nameplate.
If the type of gas to be connected is diff erent from
that used for testing, proceed as follows.
1) Turn off the gas supply tap (A).
2) Change the burner nozzle (see pag. 16).
3) Remove the testing gas sticker from the dataplate
(B) and apply the new one to identify the gas being
used.
4) Remove the sticker from the appliance and apply
the new one (C) with the category of the country
of installation.
5) Activate the "Gas type conversion" procedure.
6) Carry out the appliance testing procedure (see
page 14).
Important
On completion of the operation, make sure that
there are no gas leaks or malfunctions.
3354462_ATG_inst_GB
C
min
0,3m
C
AL II2H3B/P: G20/20mbar, G30/30mbar
AL II2H3+: G20/20mbar, G30-G31/28_30-37mbar
AT II2H3B/P: G20/20mbar, G30/50mbar
AT II2H3P: G20/20mbar, G31/50mbar
BE II2E+3+: G20-G25/20-25mbar, G30-G31/28_30-37mbar
BE II2E+3B/P: G20-G25/20-25mbar, G30/30mbar
BE II2E+3P: G20-G25/20-25mbar, G31/37mbar
BE II2E+3B: G20-G25/20-25mbar, G30/30mbar
BG II2H3B/P: G20/20mbar, G30/30mbar
BG II2H3+: G20/20mbar, G30-G31/28_30-37mbar
A
G20 m3/h
kW mbar
G25 kW m3/h mbar
G30 kW Kg/h mbar
B
G20 m3/h G31
kW mbar
G25 kW m3/h mbar
G30 kW Kg/h mbar
- 13 -
IS II2H3B/P: G20/20mbar, G30/30mb
IS II2H3+: G20/20mbar, G30-G31/28_30-3
3P
IT II2H3+: G20/20mbar, G30-G31/28_30-3
IT II2H3B/P: G20/20mbar, G30/30mb
IT II2H3P: G20/20mbar, G31/37mba
LT II2H3+: G20/20mbar, G30-G31/28_30-3
LT II2H3B/P: G20/20mbar, G30/30mb
LT II2H3P: G20/20mbar, G31/37mba
LU II2H3B/P: G20/20mbar, G30/30mb
LU II2H3+: G20/20mbar, G30-G31/28_30-3
01
0051
G31
kW Kg/h mbar
~
~
TYPE
01
0051
kW Kg/h mbar
~ ~
~
TYPE
GB
~
C
rif
CE n
ENGLISH