General Information; Instructions And Warnings For The Reader; Purpose Of The Manual; Identification Of Manufacturer And Appliance - Angelo Po AT 61G-GW-GR-GWR Manuel D'utilisation

INSTRUCTIONS AND WARNINGS FOR THE READER

To fi nd the specifi c topics of interest to you quickly, refer to the index at the start of the manual.
This manual manuale contains all the information necessary for special categories of reader, i.e.
all skilled operators authorised to handle, transport, install, service, repair and scrap the appli-
ance.

PURPOSE OF THE MANUAL

– The manufacturer has produced this manual, which forms an integral part of the appliance, to
provide the necessary information for those authorised to interact with it during its working life.
As well as adopting good practices for use, the manual's intended readers must read it thoroughly
and apply its instructions to the letter.
– This information is provided by the manufacturer in the original language (Italian) and is trans-
lated into other languages to meet legal and/or business requirements. Reading this information
will avoid health and safety risks to people and fi nancial losses.
– Keep this manual in a clearly identifi ed safe place throughout the working life of the appliance,
so that it will always be available when required for consultation.
– The manufacturer reserves the right to make changes without any obligation to provide any
prior notice.
– A number of symbols have been used to highlight particularly important parts of the text or impor-
tant specifi cations. Their meaning is as defi ned below.
Caution - Warning
Indicates that suitable procedures must be adopted to avoid putting people's health and
safety at risk or causing economic losses.
Important
Indicates particularly important technical information which must not be overlooked.

IDENTIFICATION OF MANUFACTURER AND APPLIANCE

The nameplates shown here are fi tted directly to the ap-
pliance.
One (fi g. 1) contains references and all essential infor-
mation for operating safety, and the other (fi g. 2) the
information about the gases for each country of use.
A) Appliance model
B) Type of customisation
C) Manufacturer identifi cation
3354462_ATG_inst_GB

GENERAL INFORMATION

- 3 -
D) Type of fume exhaust ven
E) Serial number
F) Protection rating
G) EC conformity mark
H) Reference standard
L) EC certifi cate number
M) Product family type
N) Gas pressure
GB
ENGLISH