Adjustment; Steering Friction; Throttle Grip Friction; Remote Control Lever Friction - TOHATSU MFS 40A Manuel De L'utilisateur

ADJUSTMENT

ENOM00073-0

1. Steering friction

Tiller handle type
ENOW00074-A
WARNING
Do not overtighten the steering friction
lever it could result in difficulty of move-
ment resulting in the loss of control caus-
ing an accident and could lead to severe
injury.
Adjust this lever to achieve the desired
steering friction (drag) on the tiller handle.
Move lever towards (A) to tighten friction
and move lever towards (B) to loosen fric-
tion.
A
1. Steering friction lever
A. Heavier
B. Lighter
ENOM00074-A

2. Throttle grip friction

ENOW00074-B
WARNING
Do not overtighten the throttle adjustment
screw or it could result in difficulty of
movement resulting in the loss of control
causing an accident and could lead to
severe injury.
Friction adjustment of the throttle grip can
be made with the throttle adjustment
screw.
1. Heavier
2. Lighter
3. Throttle friction adjustment screw
ENOM00075-0

3. Remote control lever friction

ENOW00074-C
Do not overtighten the remote control
1
throttle friction adjustment screw or it
could result in difficulty of movement
B
resulting in the loss of control causing an
accident and could lead to severe injury.
To adjust the friction of the remote control
ENOF00910-0
lever, turn the throttle friction adjustment
screw on the front of the remote control.
Turn clockwise to increase the friction and
counter-clockwise to decrease it.
Side mount type
1
2
3
WARNING
A
B
1
59
ENOF00911-0
ENOF00078-0