Warming Up The Engine - TOHATSU MFS 40A Manuel De L'utilisateur

5. Tie a loop in the another end of the
emergency starter rope and attach
socket wrench that is included in the
tool kit.
ENOW00860-0
CAUTION
Be sure to keep the harness away from the
rotation parts.
1
1. Harness
6. Set the control lever in the Neutral
position.
7. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it quickly.
8. After engine starts, do not reinstall fly-
wheel cover and top cowl.
ENOM00043-A

3. Warming up the engine

Warm the engine at low engine speeds for
about
3 minutes : above 41°F (5
5 minutes at 2000 rpm : above 41°F (5
This allows the lubricating oil to circulate to
all parts of the engine. Operating the
engine without warm up shortens the
engine's life.
ENOF00874-0
Be sure to check that cooling water is
coming out of the cooling water check
port during warm up.
ENOM00044-0
Engine speeds
Idling speed after warming up.
Remark: In case of cold engine starting,
idling speed is increased about 400 rpm
for several minutes.
ENOF00875-0
Clutch in (In gear)
ENOM00
Trolling engine speed control
function
If the main switch key is pressed for 1 (one)
second during idling or trolling operation,
engine revolution change.
ENGINE OPERATION
Clutch off (Out of gear)
850 rpm
-0
41
)
)
ENOF00868-0
850 rpm