Safety Instructions For The Installation According To Ul Or Ur - Lenze 8200 vector Instructions De Montage

Safety instructions for the installation according to U
J
Warnings!
Motor Overload Protection
ƒ
For information on the protection level of the internal overload protection for a
–
motor load, see the corresponding manuals or software helps.
If the integral solid state motor overload protection is not used, external or
–
remote overload protection must be provided.
Branch Circuit Protection
ƒ
The integral solid state protection does not provide branch circuit protection.
–
Branch circuit protection has to be provided externally in accordance with
–
corresponding instructions, the National Electrical Code and any additional codes.
Please observe the specifications for fuses and screw−tightening torques in these
ƒ
instructions.
E82xV302K2C ... E82xV752K2C (3.0 kW ... 7.5 kW, 240 V devices):
ƒ
Suitable for use on a circuit capable of delivering not more than 5000 rms
–
symmetrical amperes, 240 V maximum, when protected by fuses.
Suitable for use on a circuit capable of delivering not more than 50000 rms
–
symmetrical amperes, 240 V maximum. When protected by CC, J, T or R class
fuses.
Shall be installed in a Pollution Degree 2 macro−environment.
–
Maximum surrounding air temperature: 0 ... +55 °C
–
> +40 °C: reduce the rated output current by 2.5 %/°C
–
Use 60/75 °C or 75 °C copper wire only.
–
E82xV302K4C ... E82xV113K4C (3.0 kW ... 11 kW, 400/500 V devices):
ƒ
Suitable for use on a circuit capable of delivering not more than 5000 rms
–
symmetrical amperes, 500 V maximum, when protected by fuses or circuit
breakers (E82xV302K4C only).
Suitable for use on a circuit capable of delivering not more than 50000 rms
–
symmetrical amperes, 500 V maximum. When protected by CC, J, T or R class
fuses
Shall be installed in a Pollution Degree 2 macro−environment.
–
Maximum surrounding air temperature: 0 ... +55 °C
–
> +40 °C: reduce the rated output current by 2.5 %/°C
–
Use 60/75 °C or 75 °C copper wire only.
–
EDK82EV113 DE/EN/FR 11.0

Safety instructions for the installation according to UL or UR

l
Safety instructions
or U
L R
2
99