Making Mince; Assembly - ADE KA 1801 Mode D'emploi

In this case:
1. Turn the mode selector switch to
outlet.
2. Allow the mincer to cool down for at least 60 minutes.
Eventually, you can use the device again as usual.

Making mince

Assembly

Fig. 1
Fig. 2
Mincer KA 1801
and unplug the power cord from the mains
1. Place the mincer on a clean and
flat surface.
2. Insert the screw body with the
filling tube on it into the mincer.
3. Move the lever to the side to
secure the filling tube.
Note the lock symbols.
They indicate whether the lever
is locked or unlocked.
Making mince
31