FITTING OF A PLUG (UK AND IRELAND ONLY)
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance must not be used without
the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord and an appropriate plug fitted
as detailed. If you remove the plug it must not be connected to a 13 amp socket and the plug must be disposed of
immediately.
If the terminals in the plug are not marked or if you are unsure about the installation of the plug please contact a qualified
electrician.
These appliances are built to the very highest of standards. There are no user serviceable parts. Follow these steps if the
unit fails to operate:
1.
Check the instructions have been followed correctly.
2.
Check that the fuse has not blown.
3.
Check that the mains supply is functional.
If the appliance will still not operate, return the appliance to the place it was purchased for a replacement. To return the
appliance to the Customer Service Department, follow the steps below:
1.
Pack it carefully (preferably in the original carton). Ensure the unit is clean.
2.
Enclose your name and address and quote the model number on all correspondence.
3.
Give the reason why you are returning it.
4.
If within the guarantee period, state when and where it was purchased and include proof of purchase (e.g. till receipt).
5.
Send it to our Customer Service Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham
OL2 5LN, UK.
Telephone: 0161 621 6900 Fax: 0161 626 0391
e-mail: enquiriesEurope@jardencs.com
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Green/Yellow
(Earth)
Blue
(Neutral)
Ensure that the outer sheath of
the cable is firmly held by the cord grip
AFTER SALES SERVICE
-9-
3A
Fuse
Brown
(Live)