Introduction; Intended Use Of Manual; Intended Use Of Product; Product Description - Stryker Impression 2980 Série Manuel D'utilisation Et D'entretien

INTENDED USE OF MANUAL

This manual is designed to assist with the operation of the Impression™ non-powered mattress system, model 2980 .
Carefully read this manual thoroughly before using or beginning maintenance on the mattress . To ensure safe operation
of this equipment, it is recommended that methods and procedures be established for educating and training staff on
the safe operation of the mattress .

INTENDED USE OF PRODUCT

The Impression™ non-powered mattress is recommended for use in the prevention of pressure ulcers . It is intended
for use on Stryker frames and on other frames supporting a 84" x 35" x 6" mattress .

PRODUCT DESCRIPTION

Impression™ is a non-powered surface for improved patient outcomes, focusing on equalizing pressure, reducing
moisture and enhancing comfort .
The mattress is compatible with any frame that supports a 84" x 35" x 6" mattress .

PRODUCT SERIAL NUMBER IDENTIFICATION

Location: attached to the foam crib at the footend of the mattress . Unzip the cover to access the foam crib .
Format:
Y Y M M S# S# S# S# S# S#
0 9 B A 0
Year Legend
2008 08
2009 09
2010 10
2011 11
Return To Table of Contents
1-4

Introduction

• Y (first Y) = Year
• Y (second Y) = Year
• M (first M) = Month product built
• M (second M) = Product Model
• S# - Sequence number assigned to product
• 09 = Year (see year legend below)
0 0 1 5 0
• B = February (see month legend below)
• A = Impression (see model legend below)
• 000150 = Sequence number (unit number)
Month Legend
January A
February B
March C
April D
May E
June F
July G
August H
September J
October K
November L
December M
2980-009-005 REV A
Models Legend
Impression (non-powered) A
www.stryker.com