Introduction; Intended Use Of Product; Specifications; Product Illustration - Stryker Power-PRO TL 6385 Manuel D'utilisation Et D'entretien

This manual is designed to assist you with the operation and maintenance of the Power-PRO TL Cot Fastener System.
Carefully read this manual thoroughly before using the equipment or beginning maintenance on it. To ensure safe
operation of this equipment, it is recommended that methods and procedures be established for educating and training
staff on the safe operation of this cot fastener system.

INTENDED USE OF PRODUCT

The Power-PRO TL Cot Fastener System Model 6385, 6386, 6387, 6388, and 6389 are not designed for any purpose
other than to restrict movement of an ambulance cot being transported in the patient compartment of an ambulance
under normal conditions. Usage of this product in any other way becomes the complete responsibility of the owner/
user. Caution must be used at all times during placement of the cot into the ambulance. The Model 6550 Ambulance
Cot, in combination with a Model 6385, 6386, 6387, 6388, and 6389 Cot Fastener System is designed in accordance
to BS EN 1789, Medical Vehicles and their Equipment - Road Ambulances.

SPECIFICATIONS

Cot Fastener System Models
Compatibility
Certifications

PRODUCT ILLUSTRATION

Head End Fastener
www.stryker.com

Introduction

6385 - Cot Fastener Floor Plate Mounting (6385-000-000)
6386 - Cot Fastener 255mm Floor Track Mounting (6386-000-000)
6387 - Cot Fastener 300mm Floor Track Mounting (6387-000-000)
6388 - Cot Fastener 255mm Floor Track Mounting (6388-000-000)
6389 - Cot Fastener 300mm Floor Track Mounting (6389-000-000)
6550 Power-PRO TL Ambulance Cot
BS EN:1789
Cot Fastener System
consists of the head end
and foot end fasteners.
6385-009-005 REV B
Foot End Fastener
Return To Table of Contents
English
1-5