Automated Cleaning - Stryker 0234010520 Guide

Automated Cleaning

6
Rinse
5
Thoroughly rinse the tray with ambient RO/DI
water until all detergent residue is removed.
Flush any crevices ve times with a syringe.
After the detergent residue is removed,
continue rinsing for a minimum of 30 seconds.
Drain the excess water from the tray and dry it
with a clean cloth and ltered pressurized air
(40 psi).
Visually inspect the tray for cleanliness, paying
close attention to hard-to-reach areas.
Rinse
1
Disassemble the tray into its individual
components: the base, lid, and (if applicable)
silicon mat.
Rinse the tray with RO/DI water at ambient
temperature until there is no visible detergent
residue. Use a syringe to assist in rinsing. After
all detergent residues have been removed,
continue to rinse for a minimum of 30 seconds.
Place the tray in the washer on an incline to
facilitate drainage.