Adjustment Of The Side Clamping - probst HVZ-UNI-II Instructions D'emploi

Adjustments
5.9

Adjustment of the side clamping

Adjust side clamping (see on the left and on the right at
the side gripping side of the device ) with the
adjusting screws.
Adjusting the side clamping corresponding to the stone
layer breadth with a socket key  Fig 19 and 20.
The adjusting must have the same value at the left and
right side (orientation on adjusting scale  Fig 26).
Then move the rotary protection downwards to secure
the side clamping (see Fig. 18).
Move the rotary protection upwards before adjusting the
adjusting screw.
Fig. 17
Fig. 19
= Enlargement of the side clamping
= Reduction of the side clamping
26 / 41
Fig. 18
Fig. 20