Adjustments; Adjustment Of The Height-Adjustable Support - probst RG-20/85-SAFELOCK Instructions D'emploi

Adjustments

5 Adjustments
Caution while adjustment work. There is danger of injuring the hands!
Use safety gloves! →
5.1

Adjustment of the height-adjustable support

The height-adjustable support is set as follows:
1. Measure the outer diameter of the pipe.
2. Pull the spring latch (1) upwards and turn it 180°,
while holding the support (2) with the other hand to
prevent it from falling down unintentionally.
→DANGER OF ACCIDENT!
3. Move the height-adjustable support (2)
(Fig. 1.1) until the correct immersion depth is set (see
viewing window →Fig. 1.1).
Example: for pipe Ø 790 - 870 mm, Ø 79-87/7 must be
displayed in the viewing window (Fig. 1.2).
4. Pull the spring bolt (1) back up and turn it 180°.
5. Move the height-adjustable support (2) until the
spring latch engages in the corresponding hole and
the height-adjustable support (2) is locked again.
a
54500009
Fig. 1.1
14 / 24
Fig. 1
Fig. 1.2
GB