Maintenance And Care; Suction Plate; Leak Test; Annual Audit - probst FLIEGUAN-AKKU-HANDY FXAH-120-GRABO-GREENLINE Instructions D'emploi

Maintenance and care

5 Maintenance and care
5.1

Suction plate

•
Clean the suction plate from adhering objects, dirt and dust at least once a day. Clean sponge rubber with
compressed air and/or water jet.
•
Replace damaged suction plate (cracks, holes, ripples) immediately.
•
Use cold cleaner to clean the device (do not use petroleum ether or corrosive liquids).
5.2

Leak test

•
Check the unit for leaks before each use.
5.3

Annual audit

•
Check all components, especially the seal. Inspection for cracks, wear, corrosion and functional reliability
by an expert.
5.4

Hints to the type plate

•
Type, serial-number and production year are very important for the identification of your device. If you
need information to spare-parts, warranty or other specific details please refer to this information´s.
•
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be handled
with the device. Do not exceed this carrying capacity/working load limit (WLL).
•
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck,
excavator) consider the deadweight of the device.
Example:
5.5

Hints to the renting/leasing of PROBST devices

•
With every renting/leasing of PROBST devices the original operating instructions must be included
unconditionally (in deviation of the user´s country's language, the respective translations of the original
operating instructions must be delivered additionally)!
58500009 / 58500010 / 58500011 14 / 16 GB