Adjustment Of Main Clamping - Facing Bedding Sand (Planum) - probst HVZ-UNI-II Instructions D'emploi

Adjustments
5.4.2

Adjustment of main clamping - facing bedding sand (planum)

Adjust the main gripping corresponding to the length of
the stone layer
Facing bedding sand (planum) side
Pull main gripping in the corresponding borehole
position (Fig.18 and 19)
Remove safety clip (4) at the bolt and pull out the bolt
(3) (see Fig. 16+17).
Fig. 16
Insert bolt (3) again and secure the bolt with safety clip
(4) (as shown in fig.17) again
A
Bild 18
3
Facing bedding
sand (planum) side
21 / 41
4
Fig. 17
A
Bild 19