Safety Rules; Duties Of The Employer; Duties Of The Machine Operators; Decline Of Responsibility - probst HVZ-GENIUS-II Instructions D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
HYDRAULIC ROTATORS
suitable to use the machine, who must be given proper
instruction on the lifting capacities and limits of use,
and who must also know and scrupulously follow the
safety rules regarding lifting loads

2.7 Duties of the employer

The employer is responsible for providing this manual
to all the personnel who will interact with the machine.

2.8 Duties of the machine operators

In addition to the duty to scrupulously follow all the
instructions contained in this manual, the operators
must notify their supervisors of any deficiency or
potentially dangerous situation that may arise.
In the event of a malfunction of the
equipment, verify the procedures
described in the various chapters.

2.9 Decline of responsibility

The manufacturer declines any
responsibility in the event that any of the
following cases occur.
The manufacturer declines any responsibility in the
event that any of the following cases occur.
improper use of the equipment;
-
use of the equipment by untrained personnel;
-
serious negligence in the routine maintenance;
-
use of non-original spare parts or parts not specific
-
to the model;
unauthorised modifications or repairs;
-
failure to follow the instructions given in this manual;
-
use contrary to the safety rules in effect in the work
-
sites;
use contrary to the national regulations applicable
-
to the machine;
exceptional events;
-
use not within the terms established.
-
3. STRUCTURE AND USE OF THE
MANUAL
Read this manual carefully
beforeproceeding to put the equipment, i.e.
the system, into service.
The purpose of this manual is to provide the user all
the information necessary for proper usage of the
equipment as well as to manage it in the safest and
most autonomous way possible.
The manual in cludes information regarding the
technical aspects, operation, machine stoppage,
maintenance, spare parts and safety.
Before carrying out any operation on the equipment,
operators and qualified technicians must carefully read
the instructions contained in this manual.
In case of any doubts as to the correct interpretation of
the instructions, please contact our office to obtain the
necessary clarification.
This manual is an integral part of the
equipment and must be properly preserved
by the purchaser.
The manual must accompany the equipment in the
event that it is sold to a new user.
The contents of this manual comply with the directive
2006/42/CE and it has been prepared following the
guidelines of the UNI 10893-2000 standards.
This manual is composed of 80 pages, including
the cover.
It is prohibited to divulge or modify the contents of the
manual or to use it for one's own purposes.
In preparing the manual, the choice was made to use
a few clear pictograms for calling attention to make
consultation simple and immediate.
Operations that represent a situation of
potential danger to the operators are
highlighted by this symbol.
These operations may cause serious injury.
Any information that requires particular
attention is highlighted with this symbol.
Operations that require a careful reading of
the instructions provided in the manual are
highlighted with this symbol.
21

Publicité

Table des Matières
loading

Table des Matières