8
Scheduling fax printing (memory lock)
Schedule Printing of Faxes allows you to specify when faxes print.
If Schedule Printing of Faxes is enabled, received faxes are stored
to memory and not printed. When Schedule Printing of Faxes is
disabled, all stored faxes print. However, it is possible to access fax
jobs stored in memory using the MFP Retrieve Job menu. Using this
menu, jobs can be printed or deleted while Schedule Printing of
Faxes is enabled. For additional information about this feature, see
the Retrieve Job menu description in the MFP user guide.
Schedule Printing of Faxes can be turned on and off manually or
scheduled to go on and off automatically for days of the week. The
Schedule Printing of Faxes schedule can be set to lockout an entire
day (24 hours) or lockout a time period during the day. Only one
lockout period can be set, but it can be applied to any number of
days. The lockout period is setup using the Schedule Printing of
Faxes setting, see "To create a schedule printing of faxes schedule"
on page 50.
To enable/disable schedule printing of faxes
Prior to enabling a fax printing schedule, a schedule must be created,
Note
see "To create a schedule printing of faxes schedule" on page 50.
1
2
3
4
5
Always save your PIN in a secure place. If you loose your PIN, you
Note
must contact HP Service Support for information on how to reset the
PIN, see "Customer Support" on page 67.
6
ENWW
Type the fax forward phone number, and then touch OK to
enable Fax Forwarding.
On the control panel, press the Menu button to display the
main menu.
Touch FAX to display the fax menu.
Scroll down and touch FAX RECEIVE.
Scroll down and touch SCHEDULE PRINTING OF FAXES to
display the PIN menu.
Type your PIN (must be at least four digits) and touch OK to
display the SCHEDULE PRINTING OF FAXES menu. If you do
not have a PIN, you will be prompted to create one.
Touch SCHEDULE PRINTING OF FAXES MODE.
Scheduling fax printing (memory lock) 49