HP LaserJet MFP Analog Fax Accessory 300 Guide page 29

All settings made on the Settings screen are temporary settings,
Note
enabled for the current fax only.
4
Notify/Notification changes the notification setting for the current fax
Note
only. To change the default setting, see "To schedule fax call report
printing" on page 54.
5
6
7
8
9
10 Touch Start to send the fax. You can either touch the Start
ENWW
c When all settings are completed, touch OK to return to the
Settings screen.
On the Settings screen touch Fax Settings to make adjustments
to the following settings:
• Sharpness - resolution
• Background - to remove background the might result from a
copying color paper for example.
• Notify/Notification - to change how you are notified of the
status of the fax transmission, (that is, if the fax was sent or
if an error occurred and the fax was not sent). This setting for
the HP LaserJet 4345mfp is located on the main Fax screen.
For additional information, see "Changing notification settings"
on page 27."
When all settings are completed, touch OK to return to the
Settings screen.
On the Settings screen, to adjust the lightness/darkness of the
fax you are sending, touch the Light or Dark arrows.
When all settings are completed on the Settings screen, touch
OK to return to the Fax screen.
Touch Speed Dial to display the BASIC screen.
Touch the check box in front of the speed dial name you wish to
use.
Touch OK to return to the Fax screen. The speed dial number(s)
will be listed in the Fax Recipient screen.
button on the touch screen or press the green Start button on the
control panel.
Sending faxes 21