Faxing (Advanced); Secure Settings; Changing Your Pin - HP LaserJet MFP Analog Fax Accessory 300 Guide

4

Faxing (advanced)

This chapter describes the advanced fax settings. Access these
settings from the Fax menu, under the MFP control panel menus.
Advanced fax settings include:

Secure settings

Two settings, Fax Forwarding and Schedule Printing of Faxes, are
secure features and require a PIN. The first time you access either
setting, you will be required to create a PIN. Once that PIN is created,
it is used to access both features. That is, a PIN has been created for
Fax Forwarding, it is used to access Schedule Printing of Faxes; or, if
the PIN was first created for Schedule Printing of Faxes, it must be
used to access Fax Forwarding. Both Schedule Printing of Faxes,
and Fax Forwarding use the same PIN. Only one PIN can be created
to access these secure settings.
If Fax Call Report is enabled with thumbnails, a report will still print
with a thumbnail of the first page of the fax, when Schedule Printing of
Faxes or Fax Forwarding is enabled. If you wish secure fax printing,
disable Fax Call Report printing.

Changing your PIN

This procedure describes how to change your existing PIN.
Always save your PIN in a secure place. If you loose your PIN, you
Note
must contact HP Service Support for information on how to reset the
PIN, see "Customer Support" on page 67.
To change your PIN, complete the following steps.
1
ENWW
Changing your personal identification number (PIN)
Fax Forwarding
Scheduling fax printing (memory lock)
Polling another fax
On the control panel, press the Menu button to display the
main menu.
Secure settings 47