HP PHOTOSMART C410 Serie Guide Rapide

PHOTOSMART PREMIUM FAX
e-ALL-IN-ONE C410 series
Start setup here...
1
Verify box contents
2 Unpack printer. Remove all tape, protective film, and packing material.
Printed in [English]
Printed in [French]
© 2010 Hewlett-Packard Development Company, L.P.
*
Remove the cardboard that secures the two-sided printing
accessory (if present)
Install the document feeder tray
1. Remove the cardboard restraint from the top of the
printer.
2. Install the document feeder tray, lining up the tabs on
the edges with the slots in the printer. Insert the tabs
into the slots until they snap into place.
Remove the carriage restraint
1. Open the cartridge access door by pulling upward on
the handles on the sides of the printer.
• The cartridge access door cannot be opened if the
scanner lid is open.
2. Remove the blue tape that holds the carriage restraint
in place.
3. Slide the carriage to the left.
4. Remove the orange plastic restraint from the carriage.
5. Close the cartridge access door.
*CQ521-90085*
*CQ521-90085*
Inside...
Setup troubleshooting
Get to know your HP Photosmart
Features and tips
Get more info
Specs
Networked printer setup and use
Fixing connectivity issues
*
*
Not included with all models
CQ521-90085
3
4
6
8
8
9
10
*