Changing The Sharpness Setting; Changing The Background Setting - HP LaserJet MFP Analog Fax Accessory 300 Guide

3
4

Changing the sharpness setting

The Sharpness setting specifies the sharpness that the scanner uses
when the MFP scans your original. Sharpness enhances the edges of
the original so that faint or fine text and graphics are reproduced more
sharply. Increasing sharpness increases resolution which also
increases transmission time.
To change the sharpness setting, perform the following steps.
1
2
3
4
5

Changing the background setting

If you are faxing a document that is printed on colored paper, you can
enhance your fax copy quality by removing the background that might
cause your fax copy to streak or blur.
To change the background setting, perform the following steps.
1
2
3
4
5
ENWW
The "Button is already configured" screen displays. Touch Clear
to remove the speed dial name from the one touch button; or,
touch Reassign to assign a different speed dial name to the key;
or, touch Cancel to return to the One Touch Button Configuration
screen.
Touch OK to accept the settings.
On the control panel main screen, touch the FAX icon to display
the Fax screen.
Touch Settings to display the Settings screen.
Touch the Fax Settings icon to display the Fax Settings screen.
Under ENHANCE, touch the left arrow to decrease the sharpness
or touch the right arrow to increase the sharpness of the image.
Touch OK to accept the setting.
On the control panel main screen, touch the FAX icon to display
the Fax screen.
Touch Settings to display the Settings screen.
Touch the Fax Settings icon to display the Fax Settings screen.
Under the ENHANCE tab, touch the left arrow to increase
background or touch the right arrow to decrease the background.
Touch OK to accept the setting.
Changing the sharpness setting 31