HP LaserJet MFP Analog Fax Accessory 300 Guide page 16

4
5
You do not need to remove any cables from the formatter for this
Note
procedure.
MFP formatter cover - HP LaserJet 4345mfp (rear view)
Figure 1-7
6
Formatter cage door - HP LaserJet 4345mfp
Figure 1-8
8 Chapter 1 Setting up
To access the formatter board, locate the removable cover (2) on
the side of the MFP, see Figure 1-7.
Remove the side cover by placing your fingers in the cover's
indented area (2) and pulling, to slide it back and remove it from
the printer.
Rear view
Open the formatter cage door (1) by pulling out on the door tab
(2) and swing (3) the door open, see Figure 1-8.
ENWW